Netgear EN104TP 4-Port 10 Mbps Ethernet Hub RJ-45 with Uplink Button Review

Average Reviews:

(More customer reviews)Our office used to use a handful of the EN-104 4-port hubs and some of the EN-108 (the 8-port version of the same product).
As 10 Mbps hubs go, the EN-104's are really nice.
The quality of NetGear equipment has always impressed me:
-Nice sturdy metal construction instead of plastic.
-Status indicators built into the jacks, so you can easily tell which cable is connected and is active.
-Right-angled barrel power connector which reduce the likelihood of disconnecting power accidentally.
-With an easy-to-access switch, Port 1 toggles between station mode and uplink mode.Unlike some hubs where two jacks are wired together, this design prevents accidentally shorting a station to an uplink.
-Screw-mount notches on the underside allows for easy attachment to the wall, underside of a counter, etc.
If you want to set up a network without spending much, these hubs work well.However, I suggest you buy a 10/100 Mbps hub instead.
Here's why:
Practically all new networkable devices today support 100 Mbps (FastEthernet) as well as 10 Mbps (Ethernet).The EN-104 hub (and other 10 Mbps hubs) will limit you to the slower speed.
As 10/100 Mbps hubs are readily available today, and are quite affordable, I think your money is better spent on the faster hub.
Is there a noticeable difference between 10 Mbps and 100 Mbps?It depends on your usage, but if you regularly work with files larger than about 300 KBytes or larger, you'll notice a tangible difference.For truly large files (like graphics/movies, or when installing an application via a network drive), a 10 second transfer at 100 Mbps will take well over a minute at 10 Mbps.
If the NetGear 10/100 hub (DS-104) is a bit too pricey for you, you might consider the Linksys EFAH05W 10/100 hub.Though not as "nice" as NetGear equipment, the Linksys 10/100 hub is only a few dollars more than this NetGear 10 Mbps hub.

Click Here to see more reviews about: Netgear EN104TP 4-Port 10 Mbps Ethernet Hub RJ-45 with Uplink Button

Product Description:
The Netgear EN104TP is an Ethernet hub supporting four 10Base-T ports and a push-button uplink port for network expansion. Connecting multiple PCs, this device provides a speed of 10 Mbps for information exchange, resource sharing, and client-server or peer-to-peer applications solutions with simple unshielded twisted-pair (UTP) wiring. Built-in LED indicators clearly display port status. Plug-and-play installation with no software to configure makes this device easy to use.
Note: The EN104TP version of the EN104 provides no BNC or AUI connection.
The Netgear EN104TP Ethernet Hub comes with a limited lifetime warranty.

Want to read more honest consumer review about Netgear EN104TP 4-Port 10 Mbps Ethernet Hub RJ-45 with Uplink Button now ?

TRENDnet 8-Port Gigabit Web Smart Power over Ethernet (PoE) Switch (10/100/1000Mbps) TPE-80WS (Black) Review

Average Reviews:

(More customer reviews)I am very happy in general. I bought this PoE switch to connect my IP Phones in VOIP IP PBX network. Technical support has been great and for the price I could't have made a better choice. I recommend it at least for a soho VOIP PBX deployment.

Click Here to see more reviews about: TRENDnet 8-Port Gigabit Web Smart Power over Ethernet (PoE) Switch (10/100/1000Mbps) TPE-80WS (Black)

Product Description:
The 8-Port 10/100/1000Mbps Web Smart PoE Switch offers advance switching controls and provides power to network devices using Ethernet cables. This scalable and cost effective solution allows a managed network to efficiently expand to previously unattainable levels.

Get 9% OFF

Want to read more honest consumer review about TRENDnet 8-Port Gigabit Web Smart Power over Ethernet (PoE) Switch (10/100/1000Mbps) TPE-80WS (Black) now ?

Network / RJ45 Coupler Review

Average Reviews:

(More customer reviews)I have one of these in every laptop bag - when I travel to hotels, if they don't have wireless internet I don't want to take a gamble on the network cable being too short to put the PC where I want it.So I pack one of these babies and an extra network cable - and length is never an issue.

Click Here to see more reviews about: Network / RJ45 Coupler

Product Description:
Used to connect two Network cables together

Want to read more honest consumer review about Network / RJ45 Coupler now ?

Cisco-Linksys EtherFast Cable/DSL Router with 4-Port 10/100 Switch Review

Average Reviews:

(More customer reviews)We have a PC upstairs, which is our primary computer, and a Mac downstairs in the tv room.I wanted both to be able to share our broadband Internet service.I looked at several routers, both wired and wireless.It came down to the Linksys (wired version) and SMC Barricade Wireless.I kept coming back to Linksys because a friend owns one and raves about it.
Besides the fact that it looks really cool, it almost took me longer to get it out of the box than it did to set it up.No kidding!Using the QuickStart guide, I was up and running in less than ten minutes.You hook up the necessary cables, restart your computer, log-in to the Linksys website to configure your router, restart your computer again, and you're good to go.
I wasn't as optimistic about setting up my Power Mac G3. However, I was pleasantly surprised and it took me all of about five minutes before I was doing some high-speed surfing on that machine as well.Fortunately, my Mac has an Ethernet port so it was just a matter of attaching the CAT-5 cable from there to the Linksys and setting the TCP/IP control panel to the Ethernet and DHCP options.I saved my configuration, opened up my browser and spent the next two hours high-speed surfing with no problems.
I have no problem recommending the Linksys, especially for its ease of setup on a PC and Mac network.While I would have preferred a wireless setup, they've received mixed reviews and I was concerned about Mac compatibility.After seeing how well my Mac performs with this Linksys, I'm ready to make ours a wired household!

Click Here to see more reviews about: Cisco-Linksys EtherFast Cable/DSL Router with 4-Port 10/100 Switch

Product Description:
The Linksys EtherFast cable/DSL router connects multiple PCs to a high-speed broadband Internet connection or to an Ethernet backbone. Configurable as a DHCP server, the EtherFast router acts as the only externally recognized Internet device on your local area network (LAN). The router can also be configured to block internal users' access to the Internet. A typical router relies on a hub or a switch to share its Internet connection, but the Linksys EtherFast router channels this connection through the full-duplex speed of its built-in EtherFast 10/100 four-port switch. This combination of router and switch technology eliminates the need to buy an additional hub or switch and serves your network as a completely dedicated, full-duplex backbone. Now your entire network can enjoy broadband Internet connections supported by its switched backbone. This unit requires an external cable or DSL modem with an Ethernet RJ-45 interface. This product comes with a one-year warranty.

Note: All Linksys routers now include a special edition of Norton Internet Security! Claim your free CD-ROM by calling (800) 814-0180, 7 a.m. to 7 p.m. Pacific, seven days a week.

Get 24% OFF

Want to read more honest consumer review about Cisco-Linksys EtherFast Cable/DSL Router with 4-Port 10/100 Switch now ?

D-Link DES-1105 5-Port 10/100 Desktop Switch Review

Average Reviews:

(More customer reviews)Bought one of these for under $15. I have a powerline Ethernet adapter connected to my router.On the other end of the second powerline adapter (which uses your house electrical wiring), I connected this switch.To the switch, I connected my DirecTV DVR and also an Ethernet to USB adapter to connect to my series 2 TiVo (which only has a USB connection).Everything works perfectly. No configuration needed (obviously, couldn't do it when connecting to non-computer devices).It just works.Both the DirectTV DVR and TiVo DVR work fine, simultaneously!

Click Here to see more reviews about: D-Link DES-1105 5-Port 10/100 Desktop Switch

Product Description:
Unmanaged Ethernet Switch, 5-Port, 10/100Mbps

Get 50% OFF

Want to read more honest consumer review about D-Link DES-1105 5-Port 10/100 Desktop Switch now ?

Cables to Go 01937 RJ45 8-pin Modular Inline Coupler Straight-Through (Ivory) Review

Average Reviews:

(More customer reviews)Do you have 2 short ethernet cables? Do you need 1 longer ethernet cable? Then this is your cheap solution instead of buying another longer cable (which costs more money).

Make sure to place in a stationary location away from high traffic zones with moving parts/people for best results.

Click Here to see more reviews about: Cables to Go 01937 RJ45 8-pin Modular Inline Coupler Straight-Through (Ivory)

Product Description:
To link several line cords together, or extend modular cable runs, this modular coupler can help you make the right connection. This inline coupler provides a female-to-female feed-through connection for easy cable hookup. Use for data/PBX applications.

Want to read more honest consumer review about Cables to Go 01937 RJ45 8-pin Modular Inline Coupler Straight-Through (Ivory) now ?

RJ45 Coupler F-F Straight Review

Average Reviews:

(More customer reviews)I use this coupler to connect my ethernet cable from downstairs to another, longer, cable to use an xbox upstairs on a bigger television. Everything worked the way I wanted it to. No problems.

Click Here to see more reviews about: RJ45 Coupler F-F Straight

Product Description:
"Make a network extension cord out of two 10Base-T Cat 5 network patch cables with an RJ-45 coupler. Both jacks accept one RJ-45 plug, allowing you to plug an Ethernet cable into both sides."

Want to read more honest consumer review about RJ45 Coupler F-F Straight now ?

Ethernet RJ45 Splitter Cable Sharing Kit For Networking Computer and VoIP ATA Review

Average Reviews:

(More customer reviews)First off, I'm not a tech guy, and perhaps I'm not using the product for what it was meant to do.But I've got a PS3 and an xbox360 and an ethernet-ready TV on the other end of my house, and only one ethernet cable run over there.I was tired of unplugging and plugging the cable to the device I needed to use.

Anyway, it doesn't really work - or it's very spotty.After running this by my geeky friends, they confirmed it and said you need a device that actively separates bandwidth and assigns ISPs or something.Anyway, long story short, I needed a "hub", which looks just like my "router" except it only cost $30 and was easy to install.

Don't want to knock the product, like I said, perhaps I wasn't using it the way the mfr. intended.But if you're hoping you can use it to just add ethernet plugs like a telephone splitter I guess it's more complicated than that!Good luck.

Click Here to see more reviews about: Ethernet RJ45 Splitter Cable Sharing Kit For Networking Computer and VoIP ATA

Product Description:
[Seller's Warning: Dear potential buyers, please read the following product description very carefully, and make sure you understand how it works before you buy it. I don't want to see that you leave me a negative feedback just because you have purchased what you don't understand.] This network cable sharing kit includes two RJ45 splitters and three 1-foot Cat5e patch cables. it is used for connecting two network devices (PC, IP telephone/VoIP ATA) to an Ethernet switch by a single cable run (e.g. Cat5e), a great way to save your cabling cost and labor!This RJ45 splitter cable sharing kit also provides a great "green" approach for networking your PCs and IP phones because they are passive devices which simply do not consume any power! Again, this product is for cable sharing, it is NOT for splitting one network port into two network ports. If what you need is to "split" one network port into two, you need to use a router or Ethernet switch/hub.

Want to read more honest consumer review about Ethernet RJ45 Splitter Cable Sharing Kit For Networking Computer and VoIP ATA now ?